Off-Road Vehicles / 4 min read
Ram 1500 Off-Road Field Guide
Identify your Ram 1500’s platform, 4WD controls and bed hardware before an easy trail day. Includes 2024 U.S. Big Horn, Rebel and TRX examples.

Identify your Ram 1500
Check whether your 2024 truck is the fifth-generation Ram 1500 (DT) or the Ram 1500 Classic (DS). Use the build sheet and the corresponding owner’s manual. Record the trim, engine, drivetrain, cab, box length and tailgate type before checking accessory fit.
What varies on a 2024 U.S. Ram 1500
Use the shift procedure and surface restrictions in the manual for your transfer case. Confirm that the indicator shows the shift is complete, and read the limits for the rear locker before using it.
- Big Horn 4WD. Ram lists an on-demand transfer case. Check your build sheet for the 4x4 Off-Road Group, which adds skid plates and an electronic locking rear axle. Find the 4WD AUTO setting if equipped and use the instructions for your selector.
- Rebel 4WD. Ram lists an electronic locking rear differential and underbody skid plates. With the part-time transfer case, identify 2WD, 4WD HIGH and 4WD LOW. Check whether your truck has the optional four-corner air suspension and read the manual for its off-road height settings.
- TRX. Ram’s manual has a separate section for the full-time 4WD system and TRX drive modes. Check the truck’s width at its widest points and allow room to turn around before entering a narrow trail.
Prepare for an easy trail day
- Confirm access and road conditions with the land manager. Allow space for the mirrors, wheelbase and rear overhang. Walk tight corners and abrupt dips from a safe spot, and choose a place to turn around.
- Find the jack, tools and spare before loading. Check that the spare can be lowered with your hitch equipment in place. If your truck has air suspension, read the manual’s jacking instructions for that system.
- Read the driver-door loading label and include passengers, the rack, cargo and trailer tongue weight in the load. Secure heavy gear low in the bed. Stop safely before returning to pavement to inspect tires, the visible underside and straps, and restore road settings.
Check RamBox, tailgate and rack mounts
- RamBox adds storage lids along the bedsides. Check the rack maker’s fit listing for those lids and for any rail inside the bed. Inspect the stake pockets and the lip below the rails before choosing a mounting method.
- The multifunction tailgate can swing open in two sections or lower as one unit. Check the rear brackets and the full travel of the tailgate before committing to a rack. Leave access to the tie-downs and keep the lights and camera view clear.
Sources & further reading
These sources support the factual reference points in this guide. Practical comparisons and packing suggestions are editorial guidance.