Off-Road Vehicles / 3 min read
Bed Racks for a 2024 Ram 1500 5-Foot-7-Inch Bed
Compare three verified bed-rack options for a U.S. 2024 Ram 1500 Rebel Crew Cab 4x4 with the 5-foot-7-inch bed, a standard tailgate and no RamBox.
Reviewed truck
U.S. 2024 Ram 1500 Rebel · Crew Cab · 5-foot-7-inch bed · Fifth generation (DT)
The reviewed 4x4 truck has the 5.7L HEMI V8 with eTorque and the uncovered factory short box. Ram lists 67.4 inches at the floor with the tailgate closed. This fit check covers the standard one-piece tailgate and no RamBox. Start with the factory bed rails and clear stake pockets, with no tonneau, drop-in liner or accessory tracks blocking the mounts. Use the separate fit listings for the Ram 1500 Classic (DS) or a different box or tailgate.
Ram 2024 short-box dimensions · Stellantis 2024 Rebel powertrain, RamBox and tailgate equipment · Ram 2024 DT owner’s manual and load guidance
Compare three verified part numbers
Scroll across to compare rack setups.
| Rack system | Yakima BedRock HD Towers | Putco Venture TEC Short-Bed Rack | Front Runner by Dometic Pro Bed Rack Kit with Slimline II Tray |
|---|---|---|---|
| Part numbers | 8001160 | 184300 | PBDR001T |
| Required adapters and hardware | 8001159 X-Large 78-inch HD Bar pair. | No separate rack adapter listed. | Use the 2022-and-newer PBDR001 front bracket layout. |
| Mounting method | Four towers clamp to factory bed rails. No drilling. | No-drill factory stake-pocket mounts. | Drill at the front mounts and rear bed pillars for threaded inserts. |
| Clearance and restrictions | Check under-bar space and crossbar overhang. | Standard tailgate and no RamBox for this fit. | Check access below the tray. |
| Vehicle load limit | Use the door-label payload and axle ratings. Count occupants, the rack, accessories, cargo and any trailer tongue weight. | ||
| Rack load limit | 300 lb on-road · 180 lb off-road · 800 lb parked. Rating source for Yakima BedRock HD Towers | 600 lb dynamic · 300 lb off-road dynamic · 1,000 lb parked. Rating source for Putco Venture TEC Short-Bed Rack | No separate rating verified for this setup. Manufacturer documentation for Front Runner by Dometic Pro Bed Rack Kit with Slimline II Tray |
Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.
Yakima
BedRock HD Towers
- Part number
- 8001160
- Mounting
- The four BedRock HD towers clamp to the factory bed rails without drilling. Yakima lists the 78-inch X-Large HD Bar pair (8001159) for the DT Crew Cab bed-rail fit. Order those crossbars separately from the towers.
- Before ordering
- The bars sit low for easier loading from the side. Check clearance for gear stored underneath and measure how far the bars extend past the towers.
Putco
Venture TEC Short-Bed Rack
- Part number
- 184300
- Mounting
- Putco lists no-drill stake-pocket mounts for the six-lug, new-body Ram 1500 with the 5-foot-7-inch bed and no RamBox.
- Before ordering
- The rack includes mounting channels for accessories. Check clearance for gear loaded from the sides and check which accessories come with the rack package you order.
Front Runner by Dometic
Pro Bed Rack Kit with Slimline II Tray
- Part number
- PBDR001T
- Mounting
- The PBDR001 fitting instructions call for drilling at the front bed mounts and rear bed pillars and installing threaded inserts at specified holes. Follow the 2022-and-newer front bracket layout for this truck.
- Before ordering
- The kit includes the full Slimline II tray and side supports. Check access to cargo below the tray and account for the rack and accessories in the truck’s payload.
Check the whole setup before buying
- Send the exact part number and photos of your rails and installed accessories to the rack maker if your truck differs from the configuration above.
- Measure clearance for the cab, tailgate, cargo and any tent or bike mount. Verify that the rack and its load clear the lights and cameras you use.
- Check the truck’s payload and axle limits with passengers, rack, mounts and cargo on board. Use the applicable rack and accessory limits for driving on pavement, driving off-road, and parking with a load.