Off-Road Vehicles / 4 min read
GMC Canyon Off-Road Field Guide
Identify your Canyon’s drivetrain, differential controls and bed hardware before an easy trail trip. Includes U.S. 2024 Elevation, AT4, Denali and AT4X examples.

Identify your Canyon
Confirm the model year, trim and drivetrain. Then match the transfer-case buttons to the single-speed or two-speed instructions in your owner’s manual. On a used truck, check for changes to the tires, spare, suspension and bed hardware.
What varies on a 2024 U.S. Canyon
- Elevation. GMC offered rear-wheel drive and four-wheel drive. The 4WD version uses a single-speed AutoTrac transfer case. Choose a first route that you can drive without low range.
- AT4 and Denali. Both have a two-speed AutoTrac transfer case. AT4 also comes with an automatic-locking rear differential and a two-inch factory lift. Read the manual for the conditions in which to use low range.
- AT4X. GMC lists selectable front and rear lockers and Multimatic DSSV dampers. The AEV Edition adds a bed-mounted spare carrier. Check access to the spare before placing cargo or rack crossbars around it.
Prepare for an easy trail day
- Confirm route access and conditions with the land manager. Compare the trail width with the truck’s width at the mirrors. Choose a turnaround before a tight bend, washout or ledge that could catch the hitch.
- Locate the spare, jack and tools before packing. If your spare is under the bed, check that a hitch accessory or loaded tailgate leaves access to the spare release.
- Use the truck’s tire and loading labels and the owner’s manual. Count passengers, rack hardware, gear and any trailer tongue weight. Secure heavy items low in the bed at suitable anchors.
- Before driving onto pavement, park safely to check your tires, visible underside and cargo restraints. Follow GMC’s instructions for restoring road settings.
Check bed mounts and tailgate access
- Match the rack’s part number to the model year and short bed. Use the rack instructions to locate each mount and check for interference from any cover, rail trim or liner.
- Measure clearance for the cab, tailgate, cargo and any bed-mounted spare. Check that you can still reach the anchors and open the MultiStow tailgate compartment if equipped. Verify rear camera visibility and brake-light operation with the rack installed.
Sources & further reading
These sources support the factual reference points in this guide. Practical comparisons and packing suggestions are editorial guidance.