Off-Road Vehicles / 3 min read

Bed Racks for a 2024 GMC Canyon Short Bed

Compare three verified bed-rack part numbers for a U.S. 2024 GMC Canyon AT4 4WD Crew Cab with an uncovered factory short bed.

By 4x4Outdoors · Research-based guide · Reviewed · Our approach

Reviewed truck

U.S. 2024 GMC Canyon AT4 · Crew Cab · 5-foot bed · Third generation

The reviewed truck has the 2.7L TurboMax, 4WD and the uncovered factory short bed. GMC lists 61.7 inches at the bed floor. Rack makers may call this the 5-foot or 5-foot-2-inch bed. This comparison assumes the original bed rails, with the stake pockets and rail lips clear of a tonneau, cap, sport bar, accessory tracks or drop-in liner.

GMC 2024 Canyon AT4 equipment and 61.7-inch short bed · GMC 2024 Canyon owner’s manual and vehicle load limits

Compare three verified part numbers

Scroll across to compare rack setups.

Part numbers, mounting, clearance and load limits for the reviewed vehicle
Rack system ADARAC by Agri-Cover Aluminum M-Series, Black Kuat IBEX Mid-Size Short Bed RealTruck Ascend Modular Truck Rack
Part numbers F4020152IBEXA1RT298511
Required adapters and hardware No separate rack adapter listed.No separate rack adapter listed.No separate rack adapter listed.
Mounting method Rails fasten in the factory stake pockets.Included clamps grip factory bed rails.Side panels attach with supplied bed-wall brackets.
Clearance and restrictions Fixed plastic pocket covers may need trimming. Check under-bar clearance.Check cab clearance in the chosen height.Connect the supplied brake-light harness and verify visibility.
Vehicle load limit Use the door-label payload and axle ratings. Count occupants, the rack, accessories, cargo and any trailer tongue weight.
Rack load limit 500 lb on-road · 400 lb off-road · 1,000 lb parked, evenly distributed. Rating source for ADARAC by Agri-Cover Aluminum M-Series, Black 300 lb driving · 1,200 lb parked. Rating source for Kuat IBEX Mid-Size Short Bed 500 lb dynamic · 1,200 lb parked.

Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.

ADARAC by Agri-Cover

Aluminum M-Series, Black

Part number
F4020152
Mounting
The rails use hardware at the factory stake pockets. Agri-Cover’s Canyon instructions call for checking whether the front plastic stake-pocket covers are removable. Fixed plastic covers may need trimming for access.
Before ordering
Agri-Cover lists the rack at 12 inches above the bed rails. Check clearance below the crossbars for tall bins and coolers.

Kuat

IBEX Mid-Size Short Bed

Part number
IBEXA1
Mounting
On the uncovered factory bed in this guide, use the included bed-rail clamps. Follow Kuat’s instructions for trucks without accessory T-channels.
Before ordering
The frame can be assembled at mid or full height. Check accessory and cargo clearance at the height you plan to use, especially if a load extends toward the cab.

RealTruck

Ascend Modular Truck Rack

Part number
RT298511
Mounting
The side panels sit inside the factory rail caps and secure using the supplied bed-wall brackets. Use the instructions for this Canyon and Colorado short-bed kit.
Before ordering
The side panels provide mounting space for gear. Installation also includes connecting the rack’s high-mounted brake light using the supplied harness. Check that the factory and rack lights work after installation.

Check the whole setup before buying

  • Send the exact part number and photos of your rails and installed accessories to the rack maker if your truck differs from the configuration above.
  • Measure clearance for the cab, tailgate, cargo and any tent or bike mount. Verify that the rack and its load clear the lights and cameras you use.
  • Check the truck’s payload and axle limits with passengers, rack, mounts and cargo on board. Use the applicable rack and accessory limits for driving on pavement, driving off-road, and parking with a load.