Off-Road Vehicles / 4 min read

Roof Racks for a 2025 Toyota Land Cruiser 250

Compare three verified roof-rack part numbers for a U.S. 2025 Toyota Land Cruiser grade with factory raised side rails and no moonroof.

By 4x4Outdoors · Research-based guide · Reviewed · Our approach

Reviewed Land Cruiser

U.S. 2025 Toyota Land Cruiser (Land Cruiser grade) · 250 Series · 4-door · 2.4L i-FORCE MAX hybrid · Factory raised side rails, no moonroof

Confirm the original raised rails and intact factory roof mounting points. The Toyota crossbars use the rails. The two platforms replace them and attach at the factory roof mounts. Check a bare roof, a factory platform or a moonroof-equipped vehicle separately.

Toyota’s 2025 manual caps cargo on the factory roof luggage carrier at 165 lb (75 kg). Toyota calls for at least two genuine crossbars or equivalent and an evenly distributed load. Check the exact rack and carrier limits as well as Toyota’s guidance for the installed setup.

2025 Toyota Land Cruiser owner’s manual, page 207

Compare verified roof rack systems

Scroll across to compare rack setups.

Part numbers, mounting, clearance and load limits for the reviewed vehicle
Rack system Toyota Genuine Accessories Roof Cross Bars for Raised Rails Front Runner by Dometic Slimline II 3/4 Roof Rack Kit Sherpa Equipment Co. Atlas Sport Full-Length Roof Rack
Part numbers PT970-60245KRTL048T647844
Required adapters and hardware No separate rack adapter listed.FATL007 foot rails are part of the kit.No separate rack adapter listed.
Mounting method Crossbars attach to factory raised rails.FATL007 foot rails replace the originals at factory holes. No drilling.Platform replaces original roof hardware at factory mounts. No drilling.
Clearance and restrictions Check bar spread and room for carrier clamps. Check hatch travel with the longest load.Check hatch travel with the longest load. Check usable platform length.Check hatch travel with the longest load. Verify room around slotted bars.
Vehicle load limit 165 lb (75 kg) cargo on the factory roof luggage carrier, evenly distributed. Confirm the applicable vehicle limit for replacement platforms.
Rack load limit 160 lb dynamic across both bars, evenly distributed, per Toyota’s 2025 Land Cruiser accessory brochure. Rating source for Toyota Genuine Accessories Roof Cross Bars for Raised Rails No separate rating verified for this setup. Manufacturer documentation for Front Runner by Dometic Slimline II 3/4 Roof Rack Kit 150 lb dynamic · 400 lb parked. Rating source for Sherpa Equipment Co. Atlas Sport Full-Length Roof Rack

Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.

Toyota Genuine Accessories

Roof Cross Bars for Raised Rails

Part number
PT970-60245
Mounting
The crossbars attach to the factory raised side rails. Toyota lists PT970-60240 as the previous version.
Before ordering
Keeps the original rails. Check the bar spacing and clamp profile required by your carrier. Follow the crossbar kit’s instructions and the lowest applicable load limit.

Front Runner by Dometic

Slimline II 3/4 Roof Rack Kit

Part number
KRTL048T
Mounting
The FATL007 foot rails replace the factory side rails. The instructions show removal of the middle ditch trim and sealing at the original roof mounting holes. Dometic specifies installation without drilling.
Before ordering
The 53.5-inch tray provides a shorter platform. Measure how much usable length your carrier and its mounting hardware need.

Sherpa Equipment Co.

Atlas Sport Full-Length Roof Rack

Part number
647844
Mounting
The original roof hardware comes off. The full-length platform bolts to factory roof locations with rubber seals. Sherpa specifies installation without drilling or cutting.
Before ordering
The low-profile platform has slotted crossbars. Check whether your carrier bolts into those slots or needs clearance around the bars for clamps.

Check the whole setup before buying

  • Check whether the liftgate and rear glass can open under the rack and any overhanging cargo. Measure loaded height before entering a garage or passing beneath low branches.
  • Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
  • For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.