Off-Road Vehicles / 4 min read
Roof Racks for the 2025 Subaru Crosstrek Wilderness
Compare three verified roof racks for a U.S. 2025 Subaru Crosstrek Wilderness with factory raised rails. Check the parts, mounting and roof limits.
Reviewed Crosstrek
U.S. 2025 Subaru Crosstrek Wilderness · Third generation (GU) · 5-door · 2.5L AWD · Factory raised side rails, no moonroof
The reviewed Crosstrek has intact factory raised rails and no moonroof. Each rack is a separate setup that attaches to those rails. Check the exact application and clearance independently for an optional moonroof, a different trim or modified rails.
Subaru’s trim specifications rate the Wilderness rails at 165 lb while driving. The owner’s manual lists a 176 lb (80 kg) total roof load ceiling, including the rack, carrying attachments and cargo. Use the lower 165 lb rail figure and follow any lower rack, carrier or off-road limit for the installed setup.
Subaru gives a 700 lb (317 kg) stationary rail limit when parked on level ground with a properly secured, evenly distributed load. Use the lowest applicable parked rating for the complete rack and tent setup, including occupants and contents.
2025 Crosstrek owner’s manual, roof loading and tents (pages 408–411)
Subaru 2025 Crosstrek trim specifications, Wilderness raised-rail ratings
Compare verified roof rack systems
Scroll across to compare rack setups.
| Rack system | Subaru Genuine Accessories by Thule Thule Aero Extended Crossbar Set, black | Rhino-Rack Vortex StealthBar Black 2 Bar Roof Rack | Rhino-Rack Pioneer 6 Platform with RX100 legs |
|---|---|---|---|
| Part numbers | SOA567X070 | JA7987 | JC-02097 |
| Required adapters and hardware | No separate rack adapter listed. | RSK02 long-strap hardware is included. | 62100F platform and four RX100 legs are included. |
| Mounting method | Included feet clamp to factory raised rails. | Flush bars mount with long straps around the rails. | Four RX100 legs clamp to raised rails. |
| Clearance and restrictions | Check bar spread and room for carrier clamps. | Check usable width between the feet and clearance under clamps. | Check hatch travel, antenna and loaded height. |
| Vehicle load limit | 165 lb rail limit while driving. The manual’s 176 lb total-roof ceiling does not raise it. 700 lb (317 kg) stationary rail limit on level ground with an evenly distributed, secured setup. | ||
| Rack load limit | No separate rating verified for this setup. Manufacturer documentation for Subaru Genuine Accessories by Thule Thule Aero Extended Crossbar Set, black | Up to 176 lb cargo on- and off-road (187 lb including rack) · 467 lb total parked. Lower vehicle limits apply. Rating source for Rhino-Rack Vortex StealthBar Black 2 Bar Roof Rack | Up to 178 lb cargo on- and off-road (220 lb including rack) · 551 lb total parked. Lower vehicle limits apply. Rating source for Rhino-Rack Pioneer 6 Platform with RX100 legs |
Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.
Subaru Genuine Accessories by Thule
Thule Aero Extended Crossbar Set, black
- Part number
- SOA567X070
- Mounting
- Subaru lists this black set for the 2025 Crosstrek Wilderness. The included feet clamp around the factory rails. The kit contains two load bars, lock cores and keys.
- Before ordering
- The bars extend beyond the feet, so there is room for a wider carrier. Check the carrier’s clamps and verify the permitted span and load for the bars.
Rhino-Rack
Vortex StealthBar Black 2 Bar Roof Rack
- Part number
- JA7987
- Mounting
- Rhino-Rack lists this flush kit for the third-generation Wilderness with raised rails. It includes two black 845 mm RSB03B bars and the RSK02 long-strap hardware kit for the rail mounts.
- Before ordering
- The bars end at the mounts. Check the usable space between the feet and the clearance needed for top-channel or wraparound attachments.
Rhino-Rack
Pioneer 6 Platform with RX100 legs
- Part number
- JC-02097
- Mounting
- The kit includes the unassembled 59-by-49-inch platform (62100F) and four RX100 legs. The legs clamp onto the factory rails.
- Before ordering
- The slatted deck provides more attachment positions. Count the platform and legs against the roof allowance and check Rhino-Rack’s limits for the installed kit and intended terrain.
Check the whole setup before buying
- Check that the rear hatch clears the platform, the carrier and its longest load. Check antenna clearance and measure loaded vehicle height for garages and low branches.
- Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
- For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.