Off-Road Vehicles / 3 min read
Bed Racks for a 2024 Jeep Gladiator with Trail Rails
Compare three verified bed-rack part numbers for a U.S. 2024 Jeep Gladiator Willys with an uncovered 5-foot bed and the factory Trail Rail System.
Reviewed truck
U.S. 2024 Jeep Gladiator Willys · Four-door crew cab · 5-foot bed · JT
Check for the factory Trail Rail System with intact front and side rails. Jeep listed a roll-up tonneau with the Trail Rail Cargo Management Group. This comparison assumes the cover is removed and the rails are clear of cover hardware or a liner that could obstruct the mounts. Use Jeep’s manual for cover removal and cargo-cleat guidance.
Jeep Trail Rail Cargo Management Group, page 9 · 2024 Gladiator owner’s manual, bed rails and tonneau
Compare three verified part numbers
Scroll across to compare rack setups.
| Rack system | Mopar Trail Rail System Crossbars | Westin Automotive Overland Cargo Rack, Textured Black | Front Runner by Dometic Pro Bed Rack Kit with Slimline II Tray |
|---|---|---|---|
| Part numbers | 82215631 | 51-10005 | PBJG001T |
| Required adapters and hardware | No separate rack adapter listed. | Trail Rail plates are included. | Order the complete kit with the Slimline II tray. |
| Mounting method | Crossbar kit attaches to factory Trail Rail. | Uprights bolt to plates in the factory side rails. | Front and rear brackets bolt to factory Trail Rail channel plates. |
| Clearance and restrictions | Remove tonneau. Check under-bar clearance and access to cargo anchors. | Westin excludes an installed tonneau. | Check loading access around the side supports. |
| Vehicle load limit | Use the door-label payload and axle ratings. Count occupants, the rack, accessories, cargo and any trailer tongue weight. | ||
| Rack load limit | No separate rating verified for this setup. Manufacturer documentation for Mopar Trail Rail System Crossbars | 800 lb parked. Westin publishes a static rating for this rack. Rating source for Westin Automotive Overland Cargo Rack, Textured Black | No separate rating verified for this setup. Manufacturer documentation for Front Runner by Dometic Pro Bed Rack Kit with Slimline II Tray |
Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.
Mopar
Trail Rail System Crossbars
- Part number
- 82215631
- Mounting
- The crossbar kit attaches to the factory Trail Rail System to hold compatible carriers above the bed.
- Before ordering
- Choose a carrier that fits the bar profile and spacing. Check under-bar clearance for packed gear and access to the original cargo anchors.
Westin Automotive
Overland Cargo Rack, Textured Black
- Part number
- 51-10005
- Mounting
- The uprights bolt to supplied plates that slide into the factory side rails. Westin’s 2024 fit chart requires the original Trail Rail System and excludes installed tonneau covers.
- Before ordering
- The low-profile frame has several positions for its top support bars. Measure clearance under the rack and confirm where your accessory can attach.
Front Runner by Dometic
Pro Bed Rack Kit with Slimline II Tray
- Part number
- PBJG001T
- Mounting
- The front and rear brackets secure to channel plates in the factory Trail Rail side rails. The included Pro Bed System supports the Slimline II tray.
- Before ordering
- Order PBJG001T for the complete kit with the tray. Check whether the side supports leave room for gear you load from the sides and for your chosen accessory mounts.
Check the whole setup before buying
- Send the exact part number and photos of your rails and installed accessories to the rack maker if your truck differs from the configuration above.
- Measure clearance for the cab, tailgate, cargo and any tent or bike mount. Verify that the rack and its load clear the lights and cameras you use.
- Check the truck’s payload and axle limits with passengers, rack, mounts and cargo on board. Use the applicable rack and accessory limits for driving on pavement, driving off-road, and parking with a load.