Off-Road Vehicles / 3 min read

Bed Racks for a 2024 Chevrolet Silverado 1500 Short Box

Compare three verified bed-rack part numbers for a U.S. 2024 Chevrolet Silverado 1500 LT Trail Boss Crew Cab 4WD with the uncovered factory short box.

By 4x4Outdoors · Research-based guide · Reviewed · Our approach

Reviewed truck

U.S. 2024 Chevrolet Silverado 1500 LT Trail Boss · Crew Cab · 5-foot-10-inch bed · Fourth generation

The reviewed truck has the 5.3L EcoTec3 V8, four-wheel drive and an uncovered factory steel short box. GM’s 5.8-foot short box measures 69.92 inches at the floor. Some rack makers list this same short-box fit as 5 ft 8 in. Match the model year and short-box application as well as the bed label. Start with factory rail caps and clear stake pockets, with no tonneau, drop-in liner or accessory tracks blocking the mounts.

GM window sticker confirming the 5.3L LT Trail Boss Crew Cab short box · GM Upfitter short-box length and rail drawings · Chevrolet 2024 Silverado 1500 owner’s manual and load guidance

Compare three verified part numbers

Scroll across to compare rack setups.

Part numbers, mounting, clearance and load limits for the reviewed vehicle
Rack system Kuat IBEX Full-Size Short-Bed Rack Putco via Chevrolet Accessories Venture TEC Short-Bed Rack Leitner Designs ACS FORGED with Sliding Rear Bar
Part numbers IBEXB21941939000-5.8FA-2031
Required adapters and hardware No separate rack adapter listed.Cross rails and Blade LED light are included.00-GMHDBK-1454 rear support bracket kit. Confirm it is included or order separately.
Mounting method Included clamps grip below factory rails. No drilling.Factory stake pockets. No drilling.Clamps to rails. Drill rear bed pillars and fit rivet nuts for braces.
Clearance and restrictions Check clamp seating and clearance to cargo and tailgate.Verify visibility and connection of the included brake light.Check rear brace clearance and sliding-bar travel.
Vehicle load limit Use the door-label payload and axle ratings. Count occupants, the rack, accessories, cargo and any trailer tongue weight.
Rack load limit 300 lb driving · 1,200 lb parked. Rating source for Kuat IBEX Full-Size Short-Bed Rack No separate rating verified for this setup. Manufacturer documentation for Putco via Chevrolet Accessories Venture TEC Short-Bed Rack 800 lb on-road · 400 lb off-road · 1,400 lb parked, evenly distributed. Rating source for Leitner Designs ACS FORGED with Sliding Rear Bar

Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.

Putco via Chevrolet Accessories

Venture TEC Short-Bed Rack

Part number
19419390
Mounting
Chevrolet’s accessory package mounts in the factory stake pockets without drilling. Check that the pocket openings are clear before installing.
Before ordering
The GM-numbered package includes cross rails and a Blade LED light. Plan the light connection as part of the install and verify brake-light visibility with gear loaded.

Leitner Designs

ACS FORGED with Sliding Rear Bar

Part number
00-5.8FA-2031
Mounting
The main rack clamps to the bed rails. The sliding-bar version requires GM rear support bracket kit 00-GMHDBK-1454. Its instructions call for drilling at the rear bed pillars and installing rivet nuts for the braces.
Before ordering
The rear bar slides to make room for tall cargo. Confirm the bracket kit is included in your order or add it separately, and check clearance around the rear braces.

Check the whole setup before buying

  • Send the exact part number and photos of your rails and installed accessories to the rack maker if your truck differs from the configuration above.
  • Measure clearance for the cab, tailgate, cargo and any tent or bike mount. Verify that the rack and its load clear the lights and cameras you use.
  • Check the truck’s payload and axle limits with passengers, rack, mounts and cargo on board. Use the applicable rack and accessory limits for driving on pavement, driving off-road, and parking with a load.