Off-Road Vehicles / 4 min read

Roof Racks for the 2025 Subaru Outback Wilderness

Compare three verified roof rack setups for a U.S. 2025 Subaru Outback Wilderness with factory raised rails. Check the exact parts, bar widths and roof load limits.

By 4x4Outdoors · Research-based guide · Reviewed · Our approach

Reviewed Outback

U.S. 2025 Subaru Outback Wilderness · Sixth generation · 5-door · 2.4L turbo AWD · Factory raised ladder-style side rails, no moonroof

Start with intact original Wilderness rails. Each system is a separate option that attaches directly to the raised rails. Check another trim or a replacement rail setup under its own fit listing. If your Wilderness has a moonroof, verify rack and carrier clearance separately.

Subaru’s 2025 manual sets a 220 lb (100 kg) driving limit for the factory rails, including the bars, attachments and cargo. The manual calls for Subaru-recommended crossbars and suitable carriers. Yakima lists a 165 lb limit in the vehicle-specific fit records for the two systems below. Follow the lowest applicable limit for your complete setup.

Subaru’s 700 lb (317 kg) stationary rail limit applies only when parked on level ground with a properly secured, evenly distributed setup. Check the rack and tent manufacturers’ separate parked limits, including occupants, before choosing either.

2025 Subaru Outback owner’s manual, Wilderness roof load limits (pages 467–469)

Compare verified roof rack systems

Scroll across to compare rack setups.

Part numbers, mounting, clearance and load limits for the reviewed vehicle
Rack system Subaru Genuine Accessories by Thule Thule Aero Extended Crossbar Set, black Yakima TimberLine Towers with Small JetStream bars Yakima TimberLine FX flush crossbars
Part numbers SOA567X0708000164 + 80004258000176 × 2
Required adapters and hardware No separate rack adapter listed.No separate rack adapter listed.No separate rack adapter listed.
Mounting method Included feet clamp to the original rails.Separate towers band around factory raised rails.Integrated feet clamp onto factory raised rails.
Clearance and restrictions Check bar spread and room for carrier clamps. Check hatch travel with the longest load.Check bar overhang and hatch travel.Check usable width between the feet and clearance under clamps. Check hatch travel with the longest load.
Vehicle load limit 220 lb (100 kg) while driving, including bars, attachments and cargo. 700 lb (317 kg) stationary on level ground with a secured, evenly distributed setup.
Rack load limit No separate rating verified for this setup. Manufacturer documentation for Subaru Genuine Accessories by Thule Thule Aero Extended Crossbar Set, black 165 lb Yakima fit rating. 165 lb Yakima fit rating.

Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.

Subaru Genuine Accessories by Thule

Thule Aero Extended Crossbar Set, black

Part number
SOA567X070
Mounting
Subaru lists this set specifically for the 2025 Wilderness. The two bars have feet that clamp to the original rails, and the kit includes lock cores and keys.
Before ordering
The extended bars give you room for wider or multiple carriers. Check bar spacing, clamp clearance and the set’s load limit for the intended cargo.

Yakima

TimberLine Towers with Small JetStream bars

Part number
8000164 + 8000425
Mounting
Use one TimberLine tower four-pack (8000164) and one pair of black Small 50-inch JetStream bars (8000425). The towers use steel bands that wrap around the raised rails.
Before ordering
The bars extend past the towers, leaving more space for carriers. Check how far the ends project and whether your carrier uses the top slots or clamps around the bars.

Yakima

TimberLine FX flush crossbars

Part number
8000176 × 2
Mounting
Fit one XS TimberLine FX bar (8000176) at the front and one at the rear. Each bar has integrated feet with steel bands that wrap around the factory rails.
Before ordering
The flush ends reduce overhang and provide less usable bar width. Measure the distance between the feet against your carrier’s required clamp or slot positions.

Check the whole setup before buying

  • Check that the rear hatch opens fully with your longest carrier or cargo installed. Account for roof antenna clearance and measure loaded height for garages and low branches.
  • Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
  • For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.