Off-Road Vehicles / 4 min read

Roof Racks for the 2025 Subaru Forester Wilderness

Compare three roof rack systems for a U.S. 2025 Subaru Forester Wilderness with factory raised rails. Verify the parts, bar sizes and panoramic moonroof clearance.

By 4x4Outdoors · Research-based guide · Reviewed · Our approach

Reviewed Forester

U.S. 2025 Subaru Forester Wilderness · Fifth generation (SK) · 5-door · 2.5L AWD · Factory raised ladder-style side rails, factory panoramic moonroof

These are three separate systems for the intact raised rails on the carryover SK Wilderness. The feet or bands grip the existing rails. Use the exact Wilderness fit listing before ordering. Check the redesigned Forester trims, the 2026 Wilderness and replacement rails under their own applications.

Subaru publishes two driving limits for the roof rails. The Wilderness owner’s manual sets 176 lb (80 kg) for the combined weight of the bars, attachments and cargo. The Getting Started Guide lists 220 lb for the rails and separately lists 150 lb for crossbars if equipped. Use the lower 176 lb rail limit unless Subaru confirms a different limit for your VIN, and follow any lower applicable crossbar or carrier rating. Yakima lists 165 lb for each of its two fits below.

The owner’s manual gives an 800 lb stationary rail limit for a properly secured, evenly distributed setup parked on level ground. For a rooftop tent, count the bars, tent, occupants and contents, and use the lowest applicable limit for the complete setup.

2025 Forester Wilderness owner’s manual, roof rails and roof tent (pages 409–411)

2025 Forester Wilderness Getting Started Guide, roof rail and crossbar ratings (page 56)

Subaru’s 2025 Forester Wilderness factory rails and panoramic moonroof

Compare verified roof rack systems

Scroll across to compare rack setups.

Part numbers, mounting, clearance and load limits for the reviewed vehicle
Rack system Subaru Genuine Accessories by Thule Thule Aero Extended Crossbar Set, black Yakima TimberLine Towers with Small JetStream bars Yakima TimberLine FX flush crossbars
Part numbers SOA567X0708000164 + 80004258000176 front + 8000175 rear
Required adapters and hardware No separate rack adapter listed.No separate rack adapter listed.No separate rack adapter listed.
Mounting method Included feet clamp to raised rails.Separate towers band around factory raised rails.Integrated feet clamp onto factory raised rails.
Clearance and restrictions Verify moonroof tilt and slide clearance before operating. Check bar spread and room for carrier clamps.Verify moonroof tilt and slide clearance before operating. Check bar overhang.Verify moonroof tilt and slide clearance before operating. Check usable width between the feet and clearance under clamps.
Vehicle load limit Use the manual’s lower 176 lb (80 kg) rail limit while driving, including bars, attachments and cargo. 800 lb stationary on level ground with a secured, evenly distributed setup.
Rack load limit No separate rating verified for this setup. Manufacturer documentation for Subaru Genuine Accessories by Thule Thule Aero Extended Crossbar Set, black 165 lb Yakima fit rating. 165 lb Yakima fit rating.

Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.

Subaru Genuine Accessories by Thule

Thule Aero Extended Crossbar Set, black

Part number
SOA567X070
Mounting
The Subaru accessory brochure assigns this kit to the 2025 Forester Wilderness. The two load bars come with feet that clamp to the raised rails. Lock cores and keys are included.
Before ordering
The extended bars leave room for wider loads or multiple carriers. Check the bar spacing, installed width and room for your carrier clamps.

Yakima

TimberLine Towers with Small JetStream bars

Part number
8000164 + 8000425
Mounting
Use a four-pack of TimberLine towers (8000164) and one pair of black Small 50-inch JetStream bars (8000425). The steel bands on the towers wrap around the factory rails.
Before ordering
The bars extend beyond the feet. Check the position of the towers and whether your carrier needs clearance around the bars or room in the top slots.

Yakima

TimberLine FX flush crossbars

Part number
8000176 front + 8000175 rear
Mounting
Order one XS bar (8000176) for the front and one XXS bar (8000175) for the rear. Each bar is sold individually and has feet with bands that wrap around the raised rails.
Before ordering
The flush system uses a shorter rear bar. Check the usable width between the rear feet and the mounting requirements of the carrier before ordering.

Check the whole setup before buying

  • Leave the panoramic moonroof closed until you verify clearance through its travel with the chosen rack and accessories installed. Check rear hatch and antenna clearance and measure the vehicle’s loaded height.
  • Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
  • For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.