Off-Road Vehicles / 4 min read
Roof Racks for the 2025 Nissan Pathfinder Rock Creek
Identify factory replacement crossbars and verified Yakima racks for the 2025 Pathfinder Rock Creek 4WD with its original tubular raised rails.
Reviewed Pathfinder
U.S. 2025 Nissan Pathfinder Rock Creek · Fifth generation (R53) · 5-door · 3.5L V6 4WD · Factory tubular raised side rails, no moonroof
Match the original Rock Creek tubular rack and its front stanchion labels. Nissan calls this the Type B rack. Use crossbars to support the load and keep cargo off the roof and side tubes. Check the Rock Creek fit record when shopping.
Nissan’s 2025 specifications give a 220 lb (100 kg) capacity for the factory Rock Creek rack with its fixed crossbars. The owner’s manual directs owners to the front stanchion labels. Yakima lists 165 lb with JetStream and up to 220 lb with the HD bars on this fit. Always follow the lowest applicable limit, including any carrier or terrain restriction.
2025 Nissan Pathfinder owner’s manual, Rock Creek Type B rack (printed pages 215–216)
Nissan 2025 Pathfinder brochure, factory Rock Creek tubular rack
Nissan 2025 Pathfinder specifications, Rock Creek fixed crossbar capacity
Compare verified roof rack systems
Scroll across to compare rack setups.
| Rack system | Nissan Genuine Parts Factory Rock Creek replacement cross rails | Yakima TimberLine towers with Medium JetStream bars | Yakima TimberLine towers with Medium HD bars and adapters |
|---|---|---|---|
| Part numbers | 73807-9A40A front/center · 73808-9A40A rear | 8000164 + 8000426 | 8000164 + 8001157 + 8003541 |
| Required adapters and hardware | Confirm replacement fasteners by VIN. | No separate rack adapter listed. | 8003541 HD Bar SL Adapter four-pack. |
| Mounting method | Individual service bars replace front, center or rear factory bars. | Bands wrap around the original raised side tubes. | Bands wrap around the side tubes. Adapters attach HD Bars to towers. |
| Clearance and restrictions | Check bar spacing and carrier clamp profile. | Check clearance to original cross rails and the antenna. | Check the larger bar profile, original rails and liftgate. |
| Vehicle load limit | 220 lb (100 kg) for the original Rock Creek rack with fixed crossbars. Check the front stanchion labels and installed bar ratings. | ||
| Rack load limit | 220 lb (100 kg) for the complete factory rack with fixed crossbars, evenly distributed. Nissan gives a single capacity. Rating source for Nissan Genuine Parts Factory Rock Creek replacement cross rails | 165 lb Yakima fit rating. | Up to 220 lb Yakima fit rating with HD bars. |
Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.
Nissan Genuine Parts
Factory Rock Creek replacement cross rails
- Part number
- 73807-9A40A front/center · 73808-9A40A rear
- Mounting
- Nissan lists 73807-9A40A for either the front or center position, and 73808-9A40A for the rear. These are individual service parts for the original tubular rack. Order the position you need and confirm fasteners by VIN.
- Before ordering
- Keep intact factory cross rails if they fit your carrier. Check its allowable clamp profile and bar spacing before you replace parts or buy a carrier.
Yakima
TimberLine towers with Medium JetStream bars
- Part number
- 8000164 + 8000426
- Mounting
- Use the four TimberLine towers and a pair of black Medium 60-inch JetStream bars. The towers band around the Rock Creek’s raised side tubes at the positions in the fit record.
- Before ordering
- The bars overhang the towers. Check room for the carrier clamps and clearance to the original cross rails. Yakima’s separate TimberLine FX fit record excludes the Rock Creek rack.
Yakima
TimberLine towers with Medium HD bars and adapters
- Part number
- 8000164 + 8001157 + 8003541
- Mounting
- Use the four TimberLine towers, the Medium 60-inch HD bar pair and the four-piece HD Bar SL Adapter kit that connects them.
- Before ordering
- Check the larger bar profile against your carrier clamps. The HD bar fit rating stays subject to the vehicle’s rack labels, secure mount positions and the installed carrier’s limit.
Check the whole setup before buying
- Slowly open the liftgate with the chosen carrier and its longest load in place. Verify room around the roof antenna and original cross rails. Measure total loaded height before driving under a garage door or low branches.
- Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
- For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.