Off-Road Vehicles / 3 min read
Bed Racks for a 2024 Nissan Frontier 5-Foot Bed
Compare three verified bed-rack part numbers for a U.S. 2024 Nissan Frontier PRO-4X Crew Cab with an uncovered 5-foot bed and factory Utili-track.
Reviewed truck
U.S. 2024 Nissan Frontier PRO-4X · Crew Cab · 5-foot bed · Third generation (D41)
The reviewed truck has the 3.8L V6, 4WD and the PRO Convenience Package. Nissan lists factory Utili-track and a spray-in bedliner with that package. The short bed measures 58.9 inches at the floor with the liner and 59.5 inches without it. The comparison assumes an uncovered bed with the original Utili-track channels initially in place and room for the mounting hardware.
Nissan 2024 Frontier bed dimensions and PRO Convenience Package · Nissan 2024 Frontier owner’s manual and Utili-track cleat instructions
Compare three verified part numbers
Scroll across to compare rack setups.
| Rack system | Kuat IBEX Short Bed 2 | Leitner Designs ACS FORGED NDNS | Yakima OverHaul HD Towers |
|---|---|---|---|
| Part numbers | IBEXA3 | 00-50USCNS-1884 | 8001151 |
| Required adapters and hardware | No separate rack adapter listed. | No separate rack adapter listed. | 8001184 long-bolt kit and 8001157 Medium HD Bar pair. |
| Mounting method | Included T-channel hardware mounts to factory Utili-track. | Clamps to the short bed. No drilling. | Clamps to the bed with longer bolts after track removal. |
| Clearance and restrictions | Verify that tie-down cleats remain usable. | Remove factory Utili-track. Check fixed-bar loading clearance. | Remove factory bed tracks. Check cab clearance at the chosen height. |
| Vehicle load limit | Use the door-label payload and axle ratings. Count occupants, the rack, accessories, cargo and any trailer tongue weight. | ||
| Rack load limit | 300 lb driving · 1,200 lb parked. Rating source for Kuat IBEX Short Bed 2 | 800 lb on-road · 400 lb off-road · 1,400 lb parked. Rating source for Leitner Designs ACS FORGED NDNS | 500 lb on-road · 300 lb off-road with HD Bars. Rating source for Yakima OverHaul HD Towers |
Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.
Kuat
IBEX Short Bed 2
- Part number
- IBEXA3
- Mounting
- On the reviewed truck, use the included T-channel mounting hardware to attach the rack to the factory Utili-track side channels. The channels stay in place.
- Before ordering
- The frame can be assembled at mid or full height. Check where the mounts sit in the side channels and confirm you still have usable positions for the original tie-down cleats.
Leitner Designs
ACS FORGED NDNS
- Part number
- 00-50USCNS-1884
- Mounting
- Leitner lists this no-drill clamp-on kit for the 2022-and-newer short bed. Remove the factory Utili-track side channels before installation as Leitner directs.
- Before ordering
- The rear load bar is fixed. Check loading clearance for tall items and plan which approved cargo anchors you’ll use after the side channels come off.
Yakima
OverHaul HD Towers
- Part number
- 8001151
- Mounting
- Yakima’s short-bed fit calls for removing the factory bed tracks and using the OH/OP Long Bolt Kit 8001184 with the bed clamps. The towers and crossbars are sold separately.
- Before ordering
- Yakima lists Medium as the minimum bar size for this fit. The matching 60-inch HD Bar pair is 8001157. The towers adjust in height to help clear the cab or keep gear within reach.
Check the whole setup before buying
- Send the exact part number and photos of your rails and installed accessories to the rack maker if your truck differs from the configuration above.
- Measure clearance for the cab, tailgate, cargo and any tent or bike mount. Verify that the rack and its load clear the lights and cameras you use.
- Check the truck’s payload and axle limits with passengers, rack, mounts and cargo on board. Use the applicable rack and accessory limits for driving on pavement, driving off-road, and parking with a load.