Off-Road Vehicles / 4 min read
Roof Racks for the 2025 Kia Telluride SX Prestige X-Pro
Compare Yakima TimberLine JetStream and TimberLine FX crossbars for the 2025 Telluride SX Prestige X-Pro AWD with original raised rails and dual sunroof.
Reviewed Telluride
U.S. 2025 Kia Telluride SX Prestige X-Pro · First generation (ON) · 5-door · 3.8L V6 AWD · Factory raised gloss-black bridge rails, dual sunroof with front tilt-slide panel
Kia specifies raised bridge rails with a gloss-black finish for this trim. Check for an open gap under the original rails and choose the raised-rail fit record. A Telluride with flush rails uses different rack hardware.
Kia’s manual sets a 220 lb (100 kg) driving ceiling for cargo and accessories on the roof rack. It gives 880 lb (400 kg) as an evenly distributed parked ceiling for the Kia rack. Yakima lists 165 lb for each setup shown here. Use the lowest applicable rating and confirm any stationary load with the makers of the crossbars and carrier.
2025 Kia Telluride owner’s manual, roof rack loading (printed page 4-149)
Kia 2025 Telluride trim table, raised rails and dual sunroof
Compare verified roof rack systems
Scroll across to compare rack setups.
| Rack system | Yakima TimberLine towers with Medium JetStream bars | Yakima TimberLine FX flush crossbars |
|---|---|---|
| Part numbers | 8000164 + 8000426 | 8000178 front + 8000177 rear |
| Required adapters and hardware | No separate rack adapter listed. | No separate rack adapter listed. |
| Mounting method | Separate towers band around factory raised rails. | Integrated feet clamp onto factory raised rails. |
| Clearance and restrictions | Keep the front sunroof closed with cargo or accessories. Check bar overhang. | Keep the front sunroof closed with cargo or accessories. Check clamp clearance. |
| Vehicle load limit | 220 lb (100 kg) while driving, including cargo and accessories. Kia rack only, 880 lb (400 kg) evenly distributed while parked. | |
| Rack load limit | 165 lb Yakima fit rating. | 165 lb Yakima fit rating. |
Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.
Yakima
TimberLine towers with Medium JetStream bars
- Part number
- 8000164 + 8000426
- Mounting
- Use one four-pack of TimberLine towers and a pair of black Medium 60-inch JetStream bars. The tower bands wrap around the factory raised rails.
- Before ordering
- The bars extend beyond the towers. Check the needed clamp space, the permitted bar spacing and clearance at the ends of the bars.
Yakima
TimberLine FX flush crossbars
- Part number
- 8000178 front + 8000177 rear
- Mounting
- Use a Medium TimberLine FX bar at the front and a Small bar at the rear. The two individual bars have feet that clamp around the raised rails.
- Before ordering
- The flush layout ends at the feet. Check usable width between the feet and room between the roof and any carrier clamps.
Check the whole setup before buying
- Keep the front sunroof panel closed when carrying cargo or roof accessories, as Kia directs. Follow the manual’s clearance precautions for the moving panel. Check the power liftgate against the longest load and measure total loaded height.
- Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
- For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.