Off-Road Vehicles / 4 min read

Roof Racks for a 2024 Jeep Wrangler Four-Door Hardtop

Compare three documented roof-rack part numbers for a U.S. 2024 Jeep Wrangler JL Willys four-door with the factory three-piece Freedom Top hardtop.

By 4x4Outdoors · Research-based guide · Reviewed · Our approach

Reviewed Wrangler

U.S. 2024 Jeep Wrangler Willys · JL · 4-door · 3.6L gas V6 · Factory three-piece Freedom Top hardtop

Check that both removable front panels and the rear hardtop are original and that the bumpers and mounting points are intact. Soft tops, Sky One-Touch, Sunrider conversions and replacement tops need their own fitment checks.

Jeep cautions against adding aftermarket loads to the hardtop and directs owners to Mopar’s accessory rack guidance. For an aftermarket system, ask Jeep and the rack maker to confirm the intended mounting and load for your exact vehicle before installation.

2024 Jeep Wrangler owner’s manual, pages 101 and 117–118

Compare verified roof rack systems

Scroll across to compare rack setups.

Part numbers, mounting, clearance and load limits for the reviewed vehicle
Rack system Mopar Removable Multipurpose Roof Rack Rhino-Rack Sportz RX300L Black 2-Bar Backbone Kit GOBI JLU Stealth Rack Multi-Light / 50-Inch LED Layout
Part numbers 82215387ABJC-06508GJJL4STLMUL50
Required adapters and hardware No separate rack adapter listed.RJLB1 Backbone, RX300L-4 legs and two SZ150B-U bars are included.No separate rack adapter listed.
Mounting method Clamps to hardtop drip rails. No drilling.Internal Backbone reinforcement. Drill and seal the factory top.External mounts use factory points near the front and rear bumper. No drilling.
Clearance and restrictions Check crossbar spread and removable-panel access.Verify hardtop panel and accessory clearance.Check ladder, rear glass and swing-gate clearance.
Vehicle load limit 100 lb (45 kg) including crossbars for the Jeep factory application. Confirm the vehicle limit for aftermarket mounts with Jeep.
Rack load limit 100 lb (45 kg) including bars, evenly distributed. Mopar’s instructions defer to Jeep’s installed roof-rack limit. Rating source for Mopar Removable Multipurpose Roof Rack RX300 two-bar ceiling is 220 lb on- and off-road · 551 lb parked, including rack weight. Confirm the Jeep and Backbone limits. Rating source for Rhino-Rack Sportz RX300L Black 2-Bar Backbone Kit 300 lb driving · 800 lb parked. Rating source for GOBI JLU Stealth Rack Multi-Light / 50-Inch LED Layout

Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.

Mopar

Removable Multipurpose Roof Rack

Part number
82215387AB
Mounting
The removable crossbar kit clamps to the factory hardtop’s drip rails. Mopar specifies installation without drilling.
Before ordering
Check that your carrier accepts the crossbar profile and available bar spacing. Jeep’s roof luggage rack section gives a 100 lb (45 kg) roof-load limit including crossbars for the factory application. Count carrier hardware and cargo within that total.

Rhino-Rack

Sportz RX300L Black 2-Bar Backbone Kit

Part number
JC-06508
Mounting
Uses the RJLB1 Backbone with internal reinforcement. Rhino-Rack’s fitting instructions call for drilling and sealing as part of the installation.
Before ordering
The listed kit includes RJLB1, RX300L-4 legs and two SZ150B-U crossbars. Confirm that the installer has the complete kit, understands the hardtop modifications and can verify the permitted load for the finished setup.

GOBI

JLU Stealth Rack Multi-Light / 50-Inch LED Layout

Part number
GJJL4STLMUL50
Mounting
An external platform rack that GOBI says uses the vehicle’s existing mounting points without drilling. Its installation guide shows front brackets and rear supports around the bumper area.
Before ordering
Select the 2024 four-door hardtop setup and match the factory rear bumper and ladder placement. Check clearance above the rack and around the rear glass and swing gate before ordering.

Check the whole setup before buying

  • Check whether the rack and carrier leave enough room to remove the front panels, open the rear glass and swing gate, and clear garage doors or low branches.
  • Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
  • For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.