Off-Road Vehicles / 4 min read
Roof Racks for the 2025 Hyundai Santa Fe XRT
Compare Yakima JetStream and HD crossbar setups for a U.S. 2025 Hyundai Santa Fe XRT AWD with factory raised bridge rails and power sunroof.
Reviewed Santa Fe
U.S. 2025 Hyundai Santa Fe XRT · Fifth generation (MX5) · 5-door · 2.5L turbo HTRAC AWD · Factory raised bridge rails, factory power sunroof
Hyundai identifies the gasoline XRT rails as the raised bridge type. Confirm a gap under the original rails where the tower straps pass. Vehicles with flush rails need a separate fit record.
Hyundai specifies 220 lb (100 kg) evenly distributed on the roof side rails. Yakima lists 165 lb for its standard TimberLine fit and up to 220 lb when paired with HD bars. Use the lowest applicable limit and check how the rack and carrier weight count before loading.
2025 Hyundai Santa Fe owner’s manual, roof side rail load limit (printed page 5-168)
Hyundai 2025 model-year guide, XRT raised rails and conventional sunroof
Compare verified roof rack systems
Scroll across to compare rack setups.
| Rack system | Yakima TimberLine towers with Medium JetStream bars | Yakima TimberLine towers with Medium HD bars and adapters |
|---|---|---|
| Part numbers | 8000164 + 8000426 | 8000164 + 8001157 + 8003541 |
| Required adapters and hardware | No separate rack adapter listed. | 8003541 HD Bar SL Adapter four-pack. |
| Mounting method | Separate towers band around factory raised rails. | Separate towers band around the rails. Adapters hold the HD Bars. |
| Clearance and restrictions | Verify moonroof tilt and slide clearance before operating. Check bar and clamp spacing. | Verify moonroof tilt and slide clearance before operating. Check carrier fit on the taller bars. |
| Vehicle load limit | 220 lb (100 kg) evenly distributed on the vehicle’s side rails. | |
| Rack load limit | 165 lb Yakima fit rating. | Up to 220 lb Yakima fit rating with HD bars. |
Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.
Yakima
TimberLine towers with Medium JetStream bars
- Part number
- 8000164 + 8000426
- Mounting
- Use one four-pack of TimberLine towers and one pair of black Medium 60-inch JetStream bars. The tower bands clamp around the factory raised rails.
- Before ordering
- The bars overhang the towers. Choose this setup only if the carrier’s required clamp spacing and width fit within the allowed positions on the rails.
Yakima
TimberLine towers with Medium HD bars and adapters
- Part number
- 8000164 + 8001157 + 8003541
- Mounting
- Use the same four-tower pack, one pair of Medium 60-inch HD bars and one four-piece HD Bar SL Adapter kit. Each adapter attaches an HD bar to its tower.
- Before ordering
- The HD bars have a different profile and use separate adapters. Verify that the carrier fits the bars and that its clamps have room above the roof. Check Yakima’s limit for the conditions you plan to drive.
Check the whole setup before buying
- Verify sunroof tilt and slide clearance with the installed bars, feet and carrier before operating the glass. Position cargo clear of the sunroof’s travel. Check the power liftgate with the longest load in place and measure the total loaded height.
- Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
- For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.