Off-Road Vehicles / 3 min read
Bed Racks for a 2024 GMC Sierra 1500 Steel Short Bed
Compare three verified rack options for a U.S. 2024 GMC Sierra 1500 AT4 Crew Cab 4WD with the steel short bed and factory MultiPro tailgate.
Reviewed truck
U.S. 2024 GMC Sierra 1500 AT4 · Crew Cab · 5-foot-10-inch bed · Fourth generation
The reviewed truck has the 3.0L Duramax turbo-diesel, four-wheel drive, an uncovered factory steel short bed and a factory MultiPro tailgate. GM measures the short bed at 69.92 inches at the floor. Some rack makers label this short-bed fit 5 ft 8 in. Start with factory rails and stake pockets clear of a tonneau, drop-in liner or accessory tracks. Check the build sheet for CarbonPro before applying this comparison.
GMC 2024 AT4 cab, bed, MultiPro and CarbonPro options · GM Upfitter short-bed floor and rail dimensions · GMC 2024 Sierra 1500 owner’s manual and load guidance
Compare three verified part numbers
Scroll across to compare rack setups.
| Rack system | Yakima OutPost HD Towers | Agri-Cover ADARAC Aluminum M-Series in Matte Black | Front Runner by Dometic Slimline II Short Load Bed Rack Kit |
|---|---|---|---|
| Part numbers | 8001152 | F4020092 | KRGM008T |
| Required adapters and hardware | 8001158 Large 68-inch HD Bar pair. | No separate rack adapter listed. | TRBU002 tracks and six legs are included. |
| Mounting method | Clamps to the factory bed rails. No drilling. | Utility rails fasten in factory stake pockets. | Drill rail tops for tracks. Six legs slide into the tracks. |
| Clearance and restrictions | Excludes CarbonPro. Check under-bar clearance. | Open front pocket covers as needed. Remove taillights to fit rear clamp plates. | Check bed access and clearance to lights and the bed camera. |
| Vehicle load limit | Use the door-label payload and axle ratings. Count occupants, the rack, accessories, cargo and any trailer tongue weight. | ||
| Rack load limit | 500 lb on-road · 300 lb off-road with HD Bars. Rating source for Yakima OutPost HD Towers | 500 lb on-road · 400 lb off-road · 1,000 lb parked, evenly distributed. Rating source for Agri-Cover ADARAC Aluminum M-Series in Matte Black | No separate rating verified for this setup. Manufacturer documentation for Front Runner by Dometic Slimline II Short Load Bed Rack Kit |
Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.
Yakima
OutPost HD Towers
- Part number
- 8001152
- Mounting
- The towers clamp to the factory bed rails without drilling. Yakima lists the separate 68-inch Large HD Bar pair (8001158) for the Sierra 1500 Crew Cab fit and excludes CarbonPro from this clamp-on application.
- Before ordering
- The towers sit at a fixed mid-height. Measure room beneath the bars for cargo and order the crossbar pair with the towers.
Agri-Cover
ADARAC Aluminum M-Series in Matte Black
- Part number
- F4020092
- Mounting
- The utility rails mount in the factory stake pockets. The steel-bed instructions show how to open the front plastic rail caps if needed and call for removing the taillight assemblies to place the rear clamp plates.
- Before ordering
- The low uprights can be repositioned along the utility rails. Check whether your plastic stake-pocket covers are removable and leave room to reach bed anchors.
Front Runner by Dometic
Slimline II Short Load Bed Rack Kit
- Part number
- KRGM008T
- Mounting
- The kit includes TRBU002 tracks and six legs that slide into them. On the reviewed factory rails, the supplied track instructions call for drilling the bed-rail tops and bolting down the tracks.
- Before ordering
- The full tray covers more of the bed opening than two crossbars. Check how you will reach cargo and whether the rack and load leave lights and any bed camera clear.
Check the whole setup before buying
- Send the exact part number and photos of your rails and installed accessories to the rack maker if your truck differs from the configuration above.
- Measure clearance for the cab, tailgate, cargo and any tent or bike mount. Verify that the rack and its load clear the lights and cameras you use.
- Check the truck’s payload and axle limits with passengers, rack, mounts and cargo on board. Use the applicable rack and accessory limits for driving on pavement, driving off-road, and parking with a load.