Off-Road Vehicles / 4 min read

Roof Racks for a 2024 Ford Bronco Four-Door Hardtop

Compare three verified roof-rack part numbers for a U.S. 2024 Ford Bronco Big Bend four-door with the factory molded-in-color hardtop.

By 4x4Outdoors · Research-based guide · Reviewed · Our approach

Reviewed Bronco

U.S. 2024 Ford Bronco Big Bend · Sixth generation · 4-door · 2.3L EcoBoost · Factory molded-in-color (MIC) hardtop

This comparison assumes the standard P255/75R17 tires, factory bumpers and intact factory mounting points. Each rack is a standalone option. Check the exact application separately if you have a soft top, a two-door body, a Bronco Sport or changes to the roof, tires or bumpers.

Ford’s 2024 manual lists maximum recommended roof-rack loads of 110 lb (50 kg) in motion and 450 lb (204 kg) when stationary, evenly distributed on the factory crossbars. Confirm the applicable vehicle and installed-system limits with Ford and the rack maker when choosing an aftermarket setup.

2024 Ford Bronco owner’s manual, pages 306–308

Compare verified roof rack systems

Scroll across to compare rack setups.

Part numbers, mounting, clearance and load limits for the reviewed vehicle
Rack system Genuine Ford Accessories Four-Door OE Roof Rack TrailRax Modular Half Roof Rack, Four-Door Without Pak Rax GOBI Four-Door Hardtop Stealth Roof Rack
Part numbers M2DZ9955100BATR-FB-4DR-MRR-HRGFBSTL-4D-HD
Required adapters and hardware No separate rack adapter listed.Pak Rax supports are optional for this fit.No separate rack adapter listed.
Mounting method Front factory mounting points and rear hardtop clamps.Four padded clamps at the rear hardtop.Front windshield mounts and frame-side rear supports. No drilling.
Clearance and restrictions Check panel access, bar spread and rear glass.Rear half of roof only. Check panel, glass and load clearance.Check ladder, rear bumper and swing gate clearance.
Vehicle load limit Ford factory crossbars only. 110 lb (50 kg) driving · 450 lb (204 kg) parked, evenly distributed. Confirm other mounts with Ford.
Rack load limit 110 lb (50 kg) driving · 450 lb (204 kg) parked. Ford’s installed OE roof rack, evenly distributed. Rating source for Genuine Ford Accessories Four-Door OE Roof Rack 150 lb dynamic · 300 lb parked. Rating source for TrailRax Modular Half Roof Rack, Four-Door Without Pak Rax 300 lb driving · 800 lb parked. Rating source for GOBI Four-Door Hardtop Stealth Roof Rack

Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.

Genuine Ford Accessories

Four-Door OE Roof Rack

Part number
M2DZ9955100BA
Mounting
The production-style kit uses the mounting points above the windshield and clamps at the rear hardtop. Ford supplies the side rails, crossbars, mounting hardware and rack tool.
Before ordering
Choose this setup for factory-style crossbars. Check the bar positions and the spacing your carrier requires. Ford’s manual identifies the rear crossbar as part of the clamp system.

TrailRax

Modular Half Roof Rack, Four-Door Without Pak Rax

Part number
TR-FB-4DR-MRR-HR
Mounting
TrailRax’s four-door instructions show four padded clamp assemblies at the rear hardtop. This direct-fit version uses the clamps without the optional Pak Rax side supports.
Before ordering
The platform occupies the rear section of the roof. Measure the usable crossbar area for your cargo and select Four-Door Half Rack Without Pak Rax when ordering.

GOBI

Four-Door Hardtop Stealth Roof Rack

Part number
GFBSTL-4D-HD
Mounting
The external rack uses front mounts at the windshield area and rear support towers attached to factory underbody points. GOBI specifies installation without drilling.
Before ordering
Select 2024 and the factory rear bumper in the manufacturer’s configurator. Check the crossbar and ladder options against your carrier and rear swing-gate clearance.

Check the whole setup before buying

  • With the carrier and load in place, check which hardtop panels are accessible and whether the rear glass and swing gate open fully. Measure loaded height before passing under garage doors or low branches.
  • Follow the applicable limits for the vehicle and every part of the installed system. Check whether the manufacturer specifies different limits for paved roads, off-road travel or a parked load. Include the rack, carrier and cargo when checking the vehicle’s payload.
  • For a rooftop tent, verify the complete rack and tent combination for driving and for occupants when parked. Get those limits for the exact installation before purchasing.