Off-Road Vehicles / 3 min read

Bed Racks for a 2024 Chevrolet Colorado Short Bed

Compare three verified bed-rack part numbers for a U.S. 2024 Chevrolet Colorado Trail Boss 4WD Crew Cab with an uncovered factory short bed.

By 4x4Outdoors · Research-based guide · Reviewed · Our approach

Reviewed truck

U.S. 2024 Chevrolet Colorado Trail Boss · Crew Cab · 5-foot bed · Third generation

The reviewed truck is a 2.7L TurboMax 4WD with an uncovered factory short bed that measures 61.7 inches at the floor. Rack listings may call it a 5-foot or 5-foot-2-inch bed. This comparison assumes original bed rails clear of a tonneau, sport bar, cap or liner hardware. Check for interference at each mount before ordering.

GM 2024 Colorado configurations and short-bed dimensions · Chevrolet 2024 Colorado owner’s manual

Compare three verified part numbers

Scroll across to compare rack setups.

Part numbers, mounting, clearance and load limits for the reviewed vehicle
Rack system Advantage via Chevrolet Accessories Telescoping Rack Leitner Designs ACS FORGED, Drill Version Putco via Chevrolet Accessories Venture TEC Rack for Short Bed
Part numbers 1943487700-CC23UP-167519435166
Required adapters and hardware GM 19434879 five-foot bed rail kit.Use the drill-version support hardware.Cross rails are included.
Mounting method Uprights bolt into separate T-slot rails. No drilling.Drill and fit rivet nuts for rear support brackets.Mounts in factory stake pockets. No drilling.
Clearance and restrictions Check cab clearance at the selected height.Check sliding-bar travel and clearance at the rear braces.Chevrolet designates this kit for off-road use only.
Vehicle load limit Use the door-label payload and axle ratings. Count occupants, the rack, accessories, cargo and any trailer tongue weight.
Rack load limit 500 lb on-road · 250 lb off-road · 750 lb parked. Rating source for Advantage via Chevrolet Accessories Telescoping Rack 800 lb on-road · 400 lb off-road · 1,400 lb parked, evenly distributed. Rating source for Leitner Designs ACS FORGED, Drill Version Up to 500 lb for the included cross rails. Chevrolet does not specify a driving rating there.

Use the lowest applicable vehicle, rack and accessory limit for your driving conditions. Select a rack name for its fitment sources and details.

Advantage via Chevrolet Accessories

Telescoping Rack

Part number
19434877
Mounting
The uprights bolt into T-slot rails. For the uncovered bed in this guide, order the separate 5-foot bed rail kit, GM part 19434879. Chevrolet lists the rails as bolt-on with no drilling.
Before ordering
The uprights have three height settings. Choose based on how much bed access you need and whether long cargo must clear the cab. Include both the rack and rail kit when checking payload.

Leitner Designs

ACS FORGED, Drill Version

Part number
00-CC23UP-1675
Mounting
Leitner lists this part for the redesigned Colorado short bed. The drill-version instructions call for drilling and fitting rivet nuts for the rear support brackets.
Before ordering
The rear load bar slides to clear space for taller cargo. Check where the support brackets land before committing to holes in the bed. Confirm how accessories attach to the load bars.

Putco via Chevrolet Accessories

Venture TEC Rack for Short Bed

Part number
19435166
Mounting
Chevrolet lists this rack and its included cross rails for the 2024 Trail Boss Crew Cab. Use the mounting instructions supplied with the exact GM kit.
Before ordering
The frame has channels for compatible accessories. Chevrolet marks this exact kit for off-road use only. Choose another option if you need a rack for public-road travel.

Check the whole setup before buying

  • Send the exact part number and photos of your rails and installed accessories to the rack maker if your truck differs from the configuration above.
  • Measure clearance for the cab, tailgate, cargo and any tent or bike mount. Verify that the rack and its load clear the lights and cameras you use.
  • Check the truck’s payload and axle limits with passengers, rack, mounts and cargo on board. Use the applicable rack and accessory limits for driving on pavement, driving off-road, and parking with a load.