Snow chains and winter traction / 6 min read
Snow chains and winter traction for camping trips
Compare link chains, cable chains, and textile tire covers, then check tire sizing, vehicle clearance, installation practice, and current route requirements.

Start with the vehicle and the route
Read the exact vehicle owner’s manual before choosing a traction device. Find the instructions for your model year, drivetrain, wheel size, and tire configuration. Record which device types are permitted, any prohibited tire sizes, the approved axle positions, and clearance restrictions. If the manual prohibits a device or leaves a critical point unclear, obtain guidance from the vehicle manufacturer. An online listing that says “SUV” does not establish approval for your SUV.
Check the road authority’s current requirements for every part of the route before leaving and again as conditions change. Carrying equipment, fitting it, and being allowed to proceed are separate questions. Caltrans explains that control areas and instructions can change quickly, and posted directions or checkpoint personnel take precedence over general reports. Postpone or turn around when you cannot meet the requirements or conditions exceed the group’s experience. A fitted pair does not make a closed road open.
Match the full tire marking and the clearance envelope
Copy the complete marking from the tires actually installed, including the relevant LT or other prefix and the entire size. Check the current device manufacturer’s selector for that marking, then compare its result with the vehicle restrictions. Different tire brands, tread designs, wear, replacement wheels, and changed tire sizes can affect a physical fit. Do not choose by wheel diameter alone or assume the same package fits a summer and winter wheel set.
Pre-fit the exact purchase on the actual vehicle before you need it. Peerless distinguishes space above the tread from space behind the sidewall, near suspension, brake lines, and other obstructions. Its Class S statement is a clearance classification, not a vehicle approval. Super Z6’s published 6.3 mm sidewall figure is not a complete clearance requirement. If something conflicts, stop the selection process and ask the manufacturers rather than using the smallest advertised number as permission.
Compare link chains, cables, and textile covers
Peerless / SCC Auto-Trac 0232805 is a diamond-pattern link-chain example with built-in automatic ratchets. The selected retail package is one pair, meaning two chains. Peerless says separate chain tensioners should not be used. Importantly, the manufacturer-linked installation mat says these chains are not to be used on snow tires. Resolve that restriction with Peerless for your exact tires before choosing this model; general winter-use descriptions do not cancel the instruction.
Peerless / SCC Super Z6 SZ143 is a different-size cable example, with diagonal alloy-coil crossmembers. Its rubber tensioners are required and included. Read the warning about protruding alloy wheels and wheel covers, because the tensioners are part of the installed system. AutoSock HP697 is a textile example supplied as two covers with gloves and instructions. These three documented sizes are not interchangeable recommendations for the same tires. Select the correct device and size through the full vehicle-and-tire checks.
Confirm the package and practice at home
Read the complete purchase list before ordering: exact size code, number of devices, tensioners where required, storage bag, and the current illustrated instructions. A “set of two” usually refers to two individual devices in these examples, not two complete axle sets. Ask about missing instructions or an unclear bundle before buying. Keep the package identification with the equipment so another driver can confirm what is in the bag.
Practice installation and removal in a safe location using the supplied directions and vehicle manual. Learn the fasteners and tensioning system while wearing the gloves you plan to carry, and check that you can reach the required positions. Inspect for damaged links, cables, rubber parts, or fabric. The existing Lifeline Black 4018 shovel can sit in the accessible snow-clearing kit after an assessment of traffic, footing, and exertion; a shovel is not a tire-mounted traction device.
Use the device within its limits
Follow the posted fitting area and pull completely out of the traffic lane before working; do not stop in moving traffic to put devices on. Use the specific parking and installation directions rather than combining steps from different products. Consult the vehicle manual for which wheels to equip on AWD or four-wheel drive. Do not infer a blanket exemption from the drivetrain badge, and confirm alternative-device acceptance with the responsible authority rather than a merchant’s nationwide marketing.
All three documented examples have a manufacturer’s 30 mph maximum ceiling; that number is not a safe target for every road. Observe any lower vehicle, posted, or condition-dependent limit. Avoid wheelspin and follow the product’s surface-use, inspection, and removal instructions. If a device is loose, damaged, or contacting the vehicle, stop at a safe location and follow the maker’s directions. Never repurpose tire chains for lifting or towing.
Plan removal, storage, and the rest of the winter kit
Plan a safe removal stop and keep the storage bag reachable after loading the campsite equipment. Follow cleaning, drying, corrosion-care, and inspection instructions before packing the devices away. AutoSock specifically calls for proper drying and removal overnight. Keep the existing JACO Elite 60 PSI gauge only if it covers the vehicle’s specified cold pressures; use the placard/manual target. Traction devices do not replace sound tires, visibility, a delay kit, weather decisions, or practiced driving judgment.
- Confirm the vehicle configuration, permitted device type, approved axle, wheel profile, and clearance restrictions.
- Match the full actual tire marking to the current size selector, then complete a pre-fit trial before travel.
- Check exact package quantity, required tensioners, instructions, current road acceptance, and any unresolved manufacturer restriction.
- Practice fitting and removal, inspect condition, and plan safe stops, drying, storage, and a decision to turn back.
Sources & further reading
These sources support the factual reference points in this guide. Practical comparisons and packing suggestions are editorial guidance.
- Peerless 2025 catalog: clearance pages 14–15, Super Z6 page 22, Auto-Trac LT page 30
- Peerless current installation-document index
- Auto-Trac installation mat, snow-tire restriction, limits, and inspection
- Super Z6 fitting, wheel-profile cautions, tensioners, and limits
- AutoSock USA HP697 pair, instructions, and care
- Caltrans changing chain controls, safe fitting areas, and current directions
- Washington State Patrol alternative traction-device and vehicle checks
- NHTSA winter vehicle and tire-pressure preparation