CURT / Weight distribution and sway control
CURT 17200 Friction Sway Control Kit
A separate friction slide bar with attachment hardware for a compatible ball mount or weight distribution hitch.
Add to my trip
Add this gear to a packing list. Saved trips stay in this browser.
Open trip checklistIs it right for your weekend?
Consider it for
A setup whose vehicle, hitch, and trailer makers permit a separate friction device and its mounting points.
The tradeoff
The bar can be removed when the manual requires it. Mounting can require drilling and a compatible tab or qualified welding.
The documented details
| Model / SKU | 17200 | Source for Model / SKU |
|---|---|---|
| Sway control | Separate friction slide bar | Source for Sway control |
| Connection | Mount-side and trailer-side attachment balls | Source for Connection |
| Brake restriction | Use only with compatible setups without surge brakes | Source for Brake restriction |
Values are manufacturer-published unless the linked source says otherwise. Missing values have not been inferred.
The complete purchase
Included or to confirm
- One friction bar, two attachment balls, spring clips, spacer plate, mounting screws, and weld-on sway tab
What you will need to check
- A compatible mount and trailer frame approved for the attachment. Have a qualified shop handle any permitted welding.
- Clearance for the slide through turns and the manual for conditions when the bar must be removed
Limitations worth knowing
- The kit adds friction to resist side-to-side motion. Weight distribution requires a separate approved system.
- CURT excludes surge brakes and calls for removing the bar in slippery conditions. Check its backing clearance and removal rules.
- Follow CURT’s maintenance instructions and keep lubricant off the friction slide surface.
Sources & review date
Documentation reviewed Nov 10, 2026. Review the current source and the exact regional SKU before buying.
No vehicle compatibility has been established for this catalog entry.